Jump to content

Prefered rod for heavy current


bdnoble

Recommended Posts

As mentioned in another post today, i was having trouble connecting on bass in strong current. What are your guys' opinion regarding rd action n current. I was using a quantum response mh with a fast to xf action. Love the feel of the rod, has good backbone for working swim jigs but as mentioned in another thread, i missed 10 or so fish (up to 18 or so inches). Ive been thinking about rod action in current lately as my normal river rods are baitcasters in medium w/ a more moderate tip and i really like that for cranks and light spinnerbaits but the feel isnt there with jigs. Be interest to hear your guys opinions

Link to comment
Share on other sites

it depends on the current flow and size lures I'm using . generally for most lures and all current condition i use a 7 ft medium action spin rod with a 30/300 size reel spooled with co poly or mono .

i primarily use a 7 ft medium lite spin with a 20/200 reel co poly or mono for creeks or very low flows in the river when i just fish smaller lures or live bait to catch more of a variety of size/species .

i use a 7 ft medium heavy spin with a 40/400 reel co poly or mono when i start throwing the really big stuff like 1/2 oz jigs tipped with 5 to 6 inch swimbaits, 5 to 6 inch crankbaits , dragging 1/2 oz or better jig/pigs on bottom upstream and such like .

 

sometimes i play with braid and nanofil when the mood strikes me . i no longer use straight fluro especially with slower presentations the line snagged in rock crevices before the lure did . i never tie on any sort of leader with the exception of certain live bait rigs .

 

keep as much bow out of the line as possible, keep your hooks sharp , multiple hook sets and watch your line are the best ways to improve your hook up/landing ratio . kirbing your hooks and opening the gaps also help a lot especially with rattlebaits . length and gap of hook also should be considered . not enough gap of hooks leads to missed strikes . at times using a longer hook to set the point back a little further back in the lure can make a difference , experiment .

Link to comment
Share on other sites

Thanks for the thoughts guys. I've caught alot more fish on spinning rods in the river than anything else, i probably like the idea of baitcasters more than they are actually worth in the river i fish. But i do feel like some baits work better when using a baitcaster. Especially crankbaits and spinnerbaits in current.

Link to comment
Share on other sites

Scott

 

Use rattlebaits instead of crankbaits if that's the case . When the Kank gets all algaed up , I don't bother with cranks myself .

 

BD

 

I've been fishing cranks and spinnerbaits on spinning gear in rivers for over 5 decades, never had any issues .

Link to comment
Share on other sites

If you are using a MH rod in general I would consider that too heavy for smallmouth fishing. Characteristics of rods vary I would pay more attention to the feel or action of the rod versus the rating. I have a ST Croix ML rod that I like a lot but it fishes closer to a medium and I use that for light jig/grub presentations in lesser current situations. On the flip side I have another rod that is MH and it's rather whippy and fishes more light a medium (probably since its 7'6") Fast current I'm usually with a medium rod with medium fast action tip. If fish are in very fast current they may have to attack extra hard, especially with crankbaits. Recently I had my yak anchored (actually double anchored) in very fast water and all I did was short cast and set the rod in a rod holder and the crankbait was just banging away on the bottom as if I was retrieving it fast. The smallmouth would hit the crank so hard since current was flying by I'd almost thought the rod holder would break. In that case I cutover to my medium action rod with a deeper backbone and that eased the shock of the fish hitting with a rod that has too fast of a tip.

 

As Norm mentioned if you are losing hook-ups check the quality of the hooks. I've definitely noticed that lures with a lot of fishing time and fish caught may lose sharpness and you can actually tell that hook-up rates reduce. If you like crankbait fishing I'm really fond of Bandit crankbaits both 100 series (shallow) and 200 series (medium). I like the size of the hooks they are a tad bit smaller and good for smallmouth fishing, the hook-up percentage is good and I can usually free them up when snagged in rocks. They also behave very nicely in current.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...